MFJ they offer a one year unconditional warranty called the
"NO MATTER WHAT" warranty. MFJ
will replace or repair a customer's MFJ unit (at MFJ's option) for one complete year. A
technical help support line is also offered toll-free for customers needing help or
advice with a ham radio project. This applies to MFJ products only !! You must have your
receipt to take advantage of this warranty.
Don't See what you are looking for ?
Please Call : 256-390-8144 or toll Free: 1-866-315-5348
MFJ-260C
The MFJ-260C is an air cooled, non-inductive resistor in a perforated metal housing. It has SO-239 connectors. You can handle a full load for 30 seconds. Silk-screened derating curve to 5 minutes. Handles 300 Watts. SWR below 1.1:1 to 30 MHz, 1.5:1 from 30 to 650Mhz. It measures a super compact 2 1/4x2 1/4x7 inches.
Specifications
IMPEDANCE: 50 Ohms, ± 10 %
VSWR: Max: 1.3:1, 0-650 MHz
POWER: 300 Watts for 30 seconds
DISSIPATION: (2 min cooldown) 25 Watts continuous
DIMENSIONS: 2½" x 2½" x 7"
MFJ-264 Dry Dummy Load
Sold out
The MFJ-264 is ham radios most versatile 50 Ohm dummy load. It does it all -- works with all radios from 1 MHz through 650 MHz and from QRP to the full 1500 Watt legal limit. The MFJ-264 has a SO-239 connector.
You get SWR below 1.3 to 650 MHz and 1.1 at 30 MHz. Handles 100 Watts for 10 minutes, 1500 Watts
MFJ-267 Dummy Load
FREE SHIPPING!!! (USA only)
MFJ-267 DUMMY LOAD, 0-60 MHZ, DRY
1.5 kW Dry Dummy Load has built-in precision, true peak-reading SWR/Wattmeter switchable to external antenna!
Worlds most versatile 1.5 kW dummy load has a built-in true peak reading SWR/Wattmeter that you can switch and use independently!
Youll find tons of uses!
Tune up your transceiver, linear amplifier, or antenna tuner into a safe 50 Ohm dummy load at full power. Then instantly switch to your antenna and monitor SWR, forward, and reflected power.
Use for testing/tuning transmitters, transceivers, amplifiers, antenna tuners, baluns, transformers, filters, matching networks, coax, stubs, transmission lines, and antennas.
The 50-Ohm dry dummy load works DC to 60 Mhz. SWR is below 1.3:1 at 30 MHz. Can handle 100 Watts for ten minutes or 1500 Watts for ten seconds. Comes with power derating curve.
Extra-large three-inch lighted Cross-Needle Meter reads SWR (1:1 to 8:1), forward, and reflected power simultaneously.
Reads true peak PEP or average power on 300/3000 Watts forward and 60/600 Watts reflected power ranges 1.8-54 MHz.
High accuracy comes from a carefully designed directional coupler, an accurate active-peak reading circuit and a precision dArsonval meter movement.
RF tight perforated aluminum cabinet. 4 W x 3 H x 10 D inches. Uses 12 VDC or 120 VAC with the MFJ-1312D.
|
|
|